Carbon Fiber Filamet™

  • $ 35.00

Carbon Fiber Filamet™ contains around 7% carbon fiber. This filament enables any Fused Filament Fabrication printer to produce carbon fiber objects.

3D Printer setup: Visit our Use Instructions page for full printing guidelines.

Temperature: 205-235°C (401-455°F)
Set print bed to 40-50°C (104-122°F) (optional)

Tip: Put a layer of blue painters tape on the print bed. Our filament has great adhesion to the bed.

Speed: 30mm/sec (1800mm/min) to start.

Layer Height: If the nozzle seems clogged, it may be that the nozzle is too close to the bed on the first layer. Once dialed in, some users are printing down to a layer height of 0.1mm.

Nozzle: 0.6mm or larger, hardened steel.

Spool Placement: Reducing friction and pull on Filamet™ during printing is important. Try hanging the filament spool just above the printer.

This product cannot be sintered.

Note: All sales final except in cases of defective product.

Made In America

We Also Recommend