Carbon Fiber Filamet™

  • $ 46.00

Carbon Fiber Filamet™ is made of TVF's signature binder combined with around 7% carbon fiber. This filament enables any Fused Filament Fabrication printer to produce carbon fiber objects.

"PLA Carbon Fiber is the most easy carbon filament that we have tested in all our experience, the extruder doesn't get embossed and the extrusion is really fine. So the result is perfect print." -Francisco Romañá, Boloberry Technologies

3D Printer setup: Visit our Use Instructions page for full printing guidelines.

Temperature: 205-235°C (401-455°F)
Set print bed to 40-50°C (104-122°F) (optional)

Tip: Put a layer of blue painters tape on the print bed. Our filament has great adhesion to the bed.

Speed: 30mm/sec (1800mm/min) to start.

Layer Height: If the nozzle seems clogged, it may be that the nozzle is too close to the bed on the first layer. Once dialed in, some users are printing down to a layer height of 0.1mm.

Nozzle: 0.6mm or larger, hardened steel.

Spool Placement: Reducing friction and pull on Filamet™ during printing is important. Try hanging the filament spool just above the printer.

This product cannot be sintered.

Note: All sales final except in cases of defective product.

Made In America