Carbon Fiber Filamet™
Carbon Fiber Filamet™ contains around 7% carbon fiber. This filament enables any Fused Filament Fabrication printer to produce carbon fiber objects.
3D Printer setup: Visit our Use Instructions page for full printing guidelines.
Temperature: 205-215°C (401-419°F)
Set print bed to 50°C (122°F) (optional)
Tip: Put a layer of blue painters tape on the print bed. Our filament has great adhesion to the bed.
Speed: 30mm/sec (1800mm/min) to start.
Layer Height: If the nozzle seems clogged, it may be that the nozzle is too close to the bed on the first layer. Once dialed in, some users are printing down to a layer height of 0.1mm.
Nozzle: 0.6mm or larger, hardened steel.
Spool Placement: Reducing friction and pull on Filamet™ during printing is important. Try hanging the filament spool just above the printer.
This product cannot be sintered.
Note: All sales final except in cases of defective product.
Made In America