Filamet™ Sampler Bundle

  • $ 59.00

A collection of 100g samples of 3 types of Filamet™.  Contains Copper, Bronze and 316L Stainless Steel Filamet™.

Filamet™ only
Filamet™ with a Deluxe Buffing Kit
Filamet™ with Firing Media

All options available in both 1.75mm and 2.85mm.

Printer setup for all materials
(Visit our Use Instructions page for full printing, sintering and polishing guidelines.):

Temperature:  401-419°F (205-215°C)
Set print bed to 122°F (50°C) (optional).
Tip: Put a layer of blue painters tape on the print bed. Filamet™ has great adhesion to the bed.

Speed:  1800mm/min to start

Layer Height:  Many slicers lay down an extra wide first layer to get good adhesion to the bed. This is not a problem unless the first layer is very thin. With traditional PLA, it will simply squeeze out at the sides. Filamet™ is more viscous which slows this process. If the printer nozzle seems clogged, it may be that the nozzle is too close to the bed on the first layer. Once dialed in, some users are printing down to a layer height of .1mm.

Nozzle:  .6mm or larger, standard  stainless steel

Reel Placement:  Reducing friction and pull on Filamet™ during printing is important. Try hanging the reel just above the printer. Any way to reduce friction and pull will greatly reduce chances of breakage during printing.

When Copper or Bronze Filamet™ are sintered in an open environment, use Magic Black Powder for the Refractory Ballast. In a vacuum or inert environment, and when sintering Stainless Steel 316L Filamet™, use Al203 and/or Powdered Graphite.


Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.

Made In America

We Also Recommend