Zirconium Silicate (Zircopax®) Ceramic Filamet™
Zirconium Silicate (Zircopax®) Filamet™ contains around 60% Zirconium Silicate. Ceramic Filamet™ enables any Fused Filament Fabrication printer to produce ceramic objects. Once fired in a kiln, the result is 100% ceramic.
What you'll need to print:
* An FFF/FDM 3D printer
* Standard brass nozzle
* Blue painters tape for your print bed. Glue sticks also work on glass print beds
What you'll need to debind & sinter:
Sintering trials have not been conducted on this material
Slicer Setup: Start with a basic PLA profile for your printer. Change the nozzle temperature to 225°C (437°F). Optionally, set the print bed to 40-50°C (104-122°F). Set the flow rate to 135%. Adjust settings from there as needed.
Tip: Put a layer of blue painters tape on the print bed. Filamet™ has great adhesion to the bed.
Nozzle: 0.6mm or larger, standard stainless steel.
Spool Placement: Reducing friction and pull on Filamet™ during printing is important. Try hanging the filament spool just above the printer.
Polishing: Visit our Use Instructions page for polishing guidelines.
Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.
Note: All sales final except in cases of defective product.