AMBROSIA ASA-CF Filament of the Gods - 1KG and 2KG Bambu AMS Friendly

This filament is highly abrasive, a Tungsten Carbide nozzle is strongly recommended.

Ambrosia Filament's line of ASA-CF filament is derived from 100% Virgin Grade-A Non-Toxic pellets and long chopped Carbon Fiber. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Due to the nature of Carbon Fiber infused filaments, colors created with CF infill are dark and they are unable to produce bright / neon or fluorescent variants.

Feed your Printer the Filament of the Gods.

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG).

Adding chopped Carbon Fiber to ASA increases its stiffness, being both more rigid and offering excellent layer adhesion. Carbon Fiber is both stronger than metal, lighter than plastic, and is heat resistant.

Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
Derived from 100% Virgin (Grade-A) non-toxic pellets
Chopped Carbon Fiber Strands
Diameter: 1.75mm (+/-0.03mm)
Filament Net Weight: 1KG
Spool Weight: 130G

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, a spool clip is recommended.

Ambrosia Filament's Recommended Print Settings for ASA filament:

Attribute	Accepted Value(s) [Recommended Value]
Extruder Temperature	250-280 Degrees Celsius [270]
Heated Bed	100-120 Degrees Celsius [110]
Build Surface	PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan	0-70% range varies by cooling capabilities
Environmental Temperatures	40-120C [45C]
Soluble Support Materials	HIPS

Technical Specifications for ASA-CF Filament:

Physical Properties	Test Methodology	Values
Density	ISO1183	1.09-1.10 g/cm^3
Melt Flow Rate (250C/2.16KG)	ISO 1133	4-7 g/10min
Mechanical Properties	Test Methodology	Values
Tensile Strength	ISO 527	39-42 Mpa
Elongation at break	ISO 527	15.5-17.5%
Flexural Modulus	ISO 527	850-900 Mpa
Flexural Strength	ISO 178	80-82.5 Mpa
Impact Strength	ISO 180	10.5-12 KJ/m^2
Thermal Dynamic Properties	Test Methodology	Values
HDT@ 0.455 MPa(66 psi)	ISO 75	88C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Carbon Fiber filaments have increased risk of use and should not be sanded or used without proper equipment. Handle with care, using appropriate tools and protective wear (e.g. gloves) when handling. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

AMBROSIA ASA-CF Filament of the Gods - 1KG and 2KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Feed your Printer the Filament of the Gods.